Contact us
Search
Dimplex

Buying guide

Dimplex Optimyst Revive 25-⁠inch

Water-mist flame, a log bed and optional warmth—with a refill routine to understand first.

Dimplex Optimyst Revive in a dining-room fireplace opening
Dimplex Optimyst Revive in a dining-room hearth.

By Hearth Outpost 8-minute read

The decision

Do you want the moving mist flame enough to maintain its water system?

Dimplex Optimyst Revive is a compelling choice when you want a flame rising above a physical log bed in a compact fireplace opening. Water mist catches the light to create the moving effect; the heater can be switched off independently. The buying question is whether that presentation is worth a refillable water system and regular cleaning in your household.

Why we would shortlist it

You want to bring life back to a familiar hearth, prefer a log-based presentation and will keep the front drawer accessible for refilling and care.

What to settle first

Check the opening and airflow, then think about the repeated task of refilling and cleaning. A finished surround that blocks the drawer would undermine one of the model’s most useful features.

Flame and access

See the effect, then look at the part you will refill.

Dimplex Optimyst Revive 25-inch flame presentation.
Dimplex Optimyst Revive flame and log bed
The Revive’s mist flame forms above its physical log fuel bed.
Dimplex Optimyst Revive front drawer open for water-tank access
The front drawer provides access to the removable water container.

Revive offers six flame themes: Natural Flame, Blue, Violet, Red, Aquamarine and the color-cycling Prism setting. There are six intensity levels and five crackling-sound volume levels, plus sound off. Give the mist generator time to respond after an adjustment; repeatedly increasing the setting is not a substitute for allowing the flame to form.

Everyday use

A water-mist fireplace has a different ownership routine.

Dimplex Optimyst Revive ownership essentials
Decision Revive detail What to plan
Water system Removable, refillable container Keep drawer access clear; this model’s routine does not require a permanent plumbing connection.
Warmth 120 V / 1,250 W supplemental heater Enjoy the flame without heat; plan the recommended dedicated 15 A circuit.
Control Supplied remote and Bluetooth FlameConnect app Bluetooth does not establish away-from-home Wi-Fi control. The handheld remote does not respond while the app is open.
Care Tank, reservoir, top cover and transducer Clean at least monthly, more often when water conditions require it.
Longer absence More than two weeks unused Drain and dry the wet components as directed before leaving the appliance unused.
Current appliance price $2,149.99 Opening, electrical and surround work are separate project costs.

The Hearth Outpost view

The drawer is as important as the flame settings.

We like Revive for someone who wants a recognizable log hearth with a more dimensional moving flame. The front-access water arrangement is a practical part of that appeal. It makes the refill routine easier to plan than a water system hidden behind a permanently finished face.

We would be candid about care before recommending it. If you want an appliance you rarely think about between uses, the refill and cleaning routine may outweigh the appeal of the mist. If the flame presentation is the main reason you are buying, those tasks may be a reasonable part of ownership.

Ratings cover the Dimplex Optimyst Revive family.

Hearth Outpost Score 7.8/10

Read the full assessment

Opening and ownership

Measure the opening and preserve the airflow.

The manual specifies a minimum opening 25¼ inches wide, 25 inches high and 12 inches deep. The appliance’s overall dimensions are a different measurement: 25¼ inches wide, 24⅞ inches high and 12⅞ inches deep. Do not substitute one set for the other when planning the finished front.

Keep the air inlet beneath the drawer unobstructed. Where the installation permits, the guide recommends an additional 16-square-inch fresh-air inlet reaching the underside. Strong drafts, ceiling fans and vent currents can disturb the mist flame, so consider the room’s airflow as well as the opening.

For an existing fireplace, the manual calls for professional chimney cleaning and blocking off before installation. Have a qualified installer review the opening, condition of the old fireplace, electrical supply and the complete instructions. This is not a reason to improvise a chimney closure yourself.

For refilling, follow the manual’s instruction to use filtered or decalcified water. If your supply is hard or uncertain, ask us to help check the water guidance for your setup. Clean the wet components at least monthly with the prescribed methods. Antimicrobial technology does not remove that task.

Everyday routine

  • Keep the drawer clear and refill the removable container as needed.
  • Let the mist generator settle after intensity changes.
  • Keep strong drafts away from the flame.

Recurring care

  • Clean the wet components at least monthly.
  • Follow the exact water-quality instructions.
  • Drain and dry the system for absences over two weeks.

Choose the complete project

One appliance; a room-specific finish.

Revive equipment

  • Refillable water system and physical log fuel bed
  • Supplemental heater and adjustable flame and sound settings
  • Handheld remote; Bluetooth app control

Plan separately

  • Suitable opening and any required professional fireplace preparation
  • Electrical supply and accessible drawer/service space
  • Surround or trim work matched to the actual opening

The current product is a single 25-inch appliance configuration. Optional finishing work should solve the room’s opening and appearance, rather than be presented as an unverified alternative appliance size.

Shop the product

Continue with the exact configuration.

The 25-inch Revive is one appliance configuration, with a refillable tank, log fuel bed and supplemental electric heat. Surround or opening work is a separate part of the project.

Warranty and documents

Two-year appliance coverage, with eligible service.

Appliance coverage
2 years limited
In-home or on-site service under the written warranty
Eligible service

Revive’s two-year limited appliance warranty covers qualifying defects and includes eligible in-home or on-site service under its terms. That service provision is useful for an installed fireplace. Accessory and trim packages have separate terms, so do not assume every part of a finished surround shares the appliance warranty.

The full limited warranty appears in the installation, use and care manual.

Before ordering

Bring the right details to the conversation.

Let’s find the right fit for your project.

Send us a photo of the opening, its measurements and any concerns about the room’s airflow. We can help you work through whether Revive is the right fit.

Speak to an Expert

Common questions

Before you choose.

Does Revive require a permanent water line?

No. The model uses a removable container reached through its front drawer. It needs refilling and care rather than a permanent plumbing connection. We do not give a fixed refill interval here because use and flame settings affect the routine.

Can I use the flame with the heater switched off?

Yes. The heater can be switched off independently, so the mist-flame presentation can be enjoyed without supplemental warmth.

Can I control Revive from outside my home?

The manual describes this model’s FlameConnect connection as Bluetooth remote control. It does not establish control through a Wi-Fi network from outside Bluetooth range.

How often does it need cleaning?

The manual calls for at least monthly cleaning of the water container, reservoir, top cover and transducer, with more frequent care when water conditions require it. Follow its instructions for cleaning methods and longer periods without use.

Your cart