American Fyre Designs Milan Low

The decision

A fireplace backdrop for an open-sky room.

We like the American Fyre Designs Milan Low when the seating arrangement needs a substantial fireplace without a tall wall behind the flame. Its six-foot width and 48-inch linear burner give the gathering a clear focus; the 44-inch overall height keeps the form lower than the Milan Tall. The 16-inch body depth is appealing where you want a relatively shallow fireplace profile. Natural gas and propane versions are offered.

Start with the location. Milan is for outdoor use, and its manual excludes installation under any overhead construction. Plan the open-sky position, fuel route and required space around it before choosing a finish.

The fireplace and the view

Check the sightline from your favorite seat.

Measure the 44-inch height from the proposed finished surface, then look from the chairs you actually use. A lower fireplace can be attractive when a view or open backdrop is part of the setting. The decision is personal: do you want the fireplace to define the edge of the lounge, or create a taller visual anchor behind it?

Considering the 60-inch Milan Tall?

The American Fyre Designs Milan Tall is the 60-inch-high alternative. Use that family setting to think about the height of the backdrop, then use the Milan Low’s actual dimensions for your plan. Sketch the Low’s 72 × 16-inch body and the required surrounding space into your actual seating layout.

Offered finishes include White Aspen, Café Blanco, Black Lava, Smoke, Travertine, Dark Basalt and Light Basalt. Bring the paving and furniture materials into the choice. The dark and warm finishes shown above give the same fireplace a different presence; the full selection is on the product page.

Choose the controls

Choose how you want to light and adjust it.

The two configurations share a listed 65,000 BTU/hr maximum input. Choose FyreStarter for its electronic ignition and Bluetooth control, with published high and low settings. The current Milan manual also lists USB-A and USB-C charging on the FyreStarter system—a useful extra when a phone or small outdoor device needs power beside the gathering.

Bluetooth control is local, with a listed range up to 30 feet in line of sight. Keep the fireplace attended while it is operating. Include the required weather-protected, in-use-covered 120V GFCI receptacle in the installation plan; the convenience of phone control comes with an electrical connection to prepare.

Manual flame sensing keeps the interaction at the fireplace’s control knob and uses an AA-powered igniter. It is worth considering if that direct operation suits you. We would choose the ignition experience you will use, rather than paying for FyreStarter in the expectation of a higher maximum burner input.

The Hearth Outpost view

Spend the time on placement and the finish.

We like the Milan Low’s broad GFRC face around the 48-inch burner. The exterior finish becomes part of the room’s materials, so we would choose it alongside the paving and furniture. For an open view behind the lounge, check how that 44-inch profile looks from the seats before choosing the taller alternative.

FyreStarter is attractive if you want phone control, high/low operation and the current system’s charging outlets. Manual control remains a sensible choice for someone who is happy to operate the fireplace at its side. Both deserve the same care over the finished position, fuel supply and decorative media.

We would settle the propane enclosure and the access route before buying the finish. A separate tank table can conceal the cylinder and become another surface in the setting; include its location and service access in the plan. A good Milan plan makes room for the whole installation.

Make room for the whole installation

The tank does not live inside the fireplace.

If you are using a propane cylinder, the Milan manual says the unit does not accommodate it. You need a separate compliant cylinder enclosure; American Fyre Designs offers tank/end tables for that purpose. That is a substantial planning difference from a fire table that hides its own cylinder.

For a permanent natural gas or household propane supply, the manual routes the connection from below near the unit’s center, with an alternative side route through a floor-level ventilation opening. Plan the accessible shut-off and connection with the installer. Keep the service route and ventilation openings clear rather than concealing them behind tightly placed furniture.

Ask your installer to apply the full manual to your actual seating layout, support, ventilation and connections. The required hard, level surface can be combustible under the manual’s conditions; have the supporting structure and full location checked before ordering.

Finish the flame presentation

Choose the media as part of the look.

The glass wind guard is included. For the burner bed, the current Milan manual calls for the supplied base lava granules first. If you also use the supplied primary lava granules, the manual states that the required media is included. You can choose that lava presentation before deciding whether a decorative upgrade is worth adding.

For a glass or gem presentation, the manual lists 35 pounds of the approved decorative glass/gems, purchased separately, above the required base media. Accent options have their own compatibility and placement instructions. Choose the exact approved media and quantities together; the fireplace photograph does not establish that its decorative arrangement is included in the price.

Check current availability on the matching Milan protective cover page. Allow the fireplace to cool completely before covering it, and follow the cover instructions. For long-term ownership, keep access to the control panel and burner area practical rather than making the fireplace difficult to maintain.

Shop the ranges

Continue with the exact configuration.

Two Milan Low configurations in White Aspen and natural gas: manual control or FyreStarter Bluetooth. Use the product page for the other offered finishes and propane configurations. Prices update from Shopify; approved decorative upgrades, site work and any cylinder enclosure are separate.

Opens in a new tab.

American Fyre Designs

American Fyre Designs Milan Low — White Aspen, natural gas, manual control

$8,009.00

White Aspen/natural gas/manual control selected. Other finishes and propane are available; decorative upgrades and installation are separate.

View product

Opens in a new tab.

American Fyre Designs

American Fyre Designs Milan Low — White Aspen, natural gas, FyreStarter Bluetooth

$10,247.00

White Aspen/natural gas/FyreStarter selected. Prepare the specified 120V supply; decorative upgrades and installation are separate.

View product

Warranty and documents

Three years on the covered fireplace and burner.

American Fyre Designs provides three-year coverage for its exterior GFRC fire features and listed burners against defects in material and workmanship. That is a worthwhile part of the Milan purchase: the substantial fireplace body and burner sit within that covered category. Electrical components, valves, accessories and controls have a separate one-year term, with the stated exclusions.

Covered GFRC fire feature and burners

3 years

Covered electrical components, valves and controls

1 year

The residential warranty covers the original purchaser in the United States or Canada, with proof of purchase and compliant installation, use and care. Labor is generally excluded. Batteries, wind guards and screens are outside the one-year component coverage; high-wind damage or discoloration is also excluded. The full warranty explains the claims process and conditions.

• Read the American Fyre Designs warranty
• Open the Milan installation and owner’s manual
• Explore FyreStarter controls and app setup

Before ordering

Build your complete Milan order.

• Check the 44-inch sightline from the seats you use.
• Confirm an open-sky location, support, access and full clearances.
• Choose natural gas or propane; place any separate cylinder enclosure.
• Choose manual or FyreStarter control and the required power arrangement.
• Specify the finish, media, cover and installation scope.

Let’s put the whole setting together.

Share a photo of the outdoor area, the dimensions and the fuel you want to use. We can help you work through the Milan Low configuration, finish and media before you finalize the installation with your professional.

Speak to an Expert

Good questions

Details worth settling before the order.